to   Self-clinching Standoffs, Studs, Blind Rivet Nuts, screws, Fasterners,

ISO-9001:AJA; ISO14001:2004/ANAB Taiwan Connector Factory 
ODM, OEM welcome  
Part No : Description :
  • Self clinching standoffs dimension & spec:
    *To be installed using any parallel acting squeezing force.
    *Provide high push out and torque-out resistance.
    *No special hole preparation, such as chamfering and deburring.
    *Reverse side of metal sheet remains flush.
    *No retapping necessary after application.
    *Low installed costs.

    For mounting; spacing; stacking panels; boards & components: Installation into pre-cut round holes and pressed with parallel squeezing force; Self clinching standoffs used where it is necessary to stack or space components away from the panel. & thru-threaded or blind types are generally standard.

    stainless cold roll steel/installation & performance

  • *option: stainless steel self clinching standoffs thin sheet metal 4.19mm/5.38mm;
     
  • Self clinching lock nuts dimension & spec:
    stainless steel/WHITE, BLACK, RED, YELLOW, IRIDESCENT;

  •  
  • Self clinching nuts dimension in millimeters & inches spec:
    stainless cold roll steel & aluminium/installation & performance

  • Fasteners used for Mounting into Printed Circuit Boards, SUS303 stainless 
     
  • Self clinching Studs dimension in millimeters & inch spec:
    Material thickness of 1.51mm more or less/installation & performance

  •  
     
  • Blind pressed nuts dimension in millimeters & inch spec:
    stainless cold roll steel & 5052-H34 aluminium/installation & performance

  •  
     
  • Spring Pins, Washers, Curved washer:
    waved washer,toothed lock washer, ribbed lock washer, Retaining Rings, R-pin, U-nut, steel/stainless

  •  
  • H01
  • Hex extender (H 5*6)

  • H02
  • Slot-1 Screw & Nut

  • H03
  • D-Lock Post

  • H05
  • Hex Rivet Nut

  • H06
  • Round Rivet Nut

  • H07-1
  • Thumbscrew 

  • H07-2
  • Thumbscrew 
     

  • H08
  • ShoulderScrew & washer

  • H09

  •  
  • H10
  • Hex Locking Screw & Nut

  • H11
  • Hex Locking Screw Nut &
    Washer

  • H12F
  • Spring Latch Lock 9/37

  • H12M
  • Spring Latch Lock 9/37

  • H14
  • Captive Screw &
    Retaining Clip

  • H15
  • Captive Screw &
    Retaining Clip

  • H16

  • Captive Screw & 
    Retaining Clip
  • H17

  •  
  • H18
  • H19
  •  

    || || 


    Temple Star Inc.
    Taiwan Office: No.327, Jiasing St., Taipei City 106, Taiwan.
    TEL:+886-2-87327785      FAX:+886-2-87325257
    Content copyright 2018 Temple Star Inc.®   Registered Business Number. 7054693A
    * All rights reserved. Other brands & product names are trademarks of the respective owners.